Cisco AS5800 Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Сервер Cisco AS5800. Cisco AS5800 16 страниц. Access server channelized t1/e1 trunk cards
Также для Cisco AS5800: Руководство (22 страниц)

Печатать страницу

Chapter 3

Channelized T3 Trunk Card

Table 3-3

Command

Step 1

AS5800> enable

Password: password

AS5800#

Step 2

AS5800# configure terminal

Enter configuration commands, one per

line. End with CNTL/Z.

AS5800(config)#

Step 3

AS5800(config)# interface loopback 0

%LINEPROTO-5-UPDOWN: Line protocol on

Interface Loopback0, changed state to

Step 4

AS5800(config-if)# loopback local

Step 5

AS5800(config-if)# no shutdown

Step 6

AS5800(config)# controller t3

shelf/slot /0

Step 7

AS5800(config-controller)# t3

description ascii-string

Step 8

AS5800(config-controller)# cablelength

200

Step 9

AS5800(config-controller)# framing

c-bit

Step 10

AS5800(config-controller)# t1 ds1

controller

Step 11

AS5800(config)# controller t1

shelf/slot/port:t1-num

Step 12

AS5800(config-controller)# clock source

line

78-7097-03

T3 Conﬁguration Commands

Description

Enter the enable command.

Enter your password.

You are in privileged EXEC mode when the prompt

changes to

AS5800#

Enter global configuration mode by entering the

configure terminal command. The example uses the

terminal configuration option.

You are in global configuration mode when the prompt

changes to

AS5800(config)#.

Enter interface loopback 0 to create interface

loopback 0, which is the logical IP subnet containing

all dial-in user addresses.

You are in interface mode when the prompt changes to

AS5800(config-if)#.

Set the normal data path back to its source (either local

or network).

Enable the interface using the no shutdown

command.

Enter controller configuration mode to configure your

T3 controller port. The only legal port value is 0.

Enter an optional text description for the T3 controller.

Enter the controller cablelength value, from 0 to 450

(feet).

Enter the type of T3 framing used. C-bit specifies C-bit

parity framing. M23 (default) specifies M23

multiplexer framing.

Create a logical T1 controller from each of the

specified T3 line time slots. The entry ds1 is a time slot

within the T3 line with a value from 1 to 28.

Enter controller configuration mode to configure your

T3 controller port. T1-num is a T1 timeslot within the

T3 line with a value from 1 to 28.

Configure the clock source as an internal clock

(internal) or a recovered clock (line).

Cisco AS5800 Universal Access Server Dial Shelf Card Guide

Configuring the CT3 Trunk Card

3-13