Cisco UCS B22 M3 Указания по установке и обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Указания по установке и обслуживанию для Сервер Cisco UCS B22 M3. Cisco UCS B22 M3 31 страница. Blade server
Также для Cisco UCS B22 M3: Руководство по обновлению (21 страниц)
Печатать страницу
2
DB9 serial connector
Drive Replacement
Each blade has up to two front-accessible, hot-swappable, 2.5-inch drives. Unused hard drive bays should always be covered with
cover plates to ensure proper cooling and ventilation.
You can remove and install hard drives without removing the blade server from the chassis.
The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available. A list of currently
supported drives is in the specification sheets at this
ucs-b-series-blade-servers/datasheet-listing.html
Before upgrading or adding a drive to a running system, check the service profile in Cisco UCS Manager and make sure the new
hardware configuration will be within the parameters allowed by the service profile.
To prevent ESD damage, wear grounding wrist straps during these procedures.
Caution
Removing a Blade Server Hard Drive
To remove a hard drive from a blade server, follow these steps:
Procedure
Step 1
Push the button to release the ejector, and then pull the hard drive from its slot.
Figure 3: Removing the Hard Drive
4
2-port USB connector for a mouse and keyboard
URL:http://www.cisco.com/c/en/us/products/servers-unified-computing/
5