Cisco UCS C240 Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Cisco UCS C240. Cisco UCS C240 22 страницы. Connected safety and security (css)
Также для Cisco UCS C240: Руководство пользователя (22 страниц)

Печатать страницу

Installing the Server In a Rack

Figure 2-2

Front-right rack post

Rear-right rack post

Slide-rail assembly

Attach the second slide-rail assembly to the opposite side of the rack. Ensure that the two slide-rail

assemblies are level and at the same height with each other.

Pull the inner slide rails on each assembly out toward the rack front until they hit the internal stops

and lock in place.

Insert the server into the slide rails (see

Step 2

This server weighs approximately 60 pounds (28 kilograms) when fully loaded with components. We

Caution

recommend that you use a minimum of two people when lifting the server. Attempting this procedure

alone could result in personal injury or equipment damage.

Note

Align the inner rails that are attached to the server sides with the front ends of the empty slide rails.

Push the server into the slide rails until it stops at the internal stops.

Push in the slide rail locking clip (item 2) on each inner rail, and then continue pushing the server

into the rack until its front flanges latch onto the rack posts.

Cisco UCS C240 Server Installation and Service Guide

2-6

Attaching a Slide-Rail Assembly

The inner rails are pre-attached to the sides of the server at the factory. You can order

replacement inner rails if these are damaged or lost (Cisco PID UCSC-RAIL-2U-I).

Length-adjustment bracket

Mounting pegs (two on each end of assembly)

Locking clips (one on each end of assembly)

Figure

2-3):

Chapter 2

Installing the Server

OL-25761-01