Cisco ASR 5000 Руководство по установке - Страница 16

Просмотреть онлайн или скачать pdf Руководство по установке для Шлюз Cisco ASR 5000. Cisco ASR 5000 37 страниц. Applying power and verifying the installation
Также для Cisco ASR 5000: Руководство по установке (18 страниц), Руководство по установке (33 страниц), Процедура установки (8 страниц)

Checking the LEDs on the SPIO(s)

Each SPIO is equipped with status LEDs:

• Run/Fail

• Active

• Standby

In addition to the status LEDs, each the RJ-45 and SFP interfaces to the management network are equipped

with the following LEDs:

• Link

• Activity

The following figure shows the LEDs on the SPIO.

The possible states for all of the SPIO's LEDs are described in the sections that follow.

Figure 4: SPIO LEDs

The SPIO's Run/ Fail LED indicates the overall status of the card. This LED is illuminated steady green for

normal operation.

If the LED is not green, use the troubleshooting information in the table to diagnose the problem.

ASR 5000 Installation Guide

Applying Power and Verifying the Installation