Cisco AT&T 3G MicroCell Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Шлюз Cisco AT&T 3G MicroCell. Cisco AT&T 3G MicroCell 20 страниц. Wireless signal booster
Также для Cisco AT&T 3G MicroCell: Руководство пользователя (20 страниц), Руководство по началу работы (11 страниц), Краткое руководство по эксплуатации (8 страниц)

Option A

AT&T 3G MicroCell™

Note: Since you have a gateway or Wi-Fi router, you will NOT need to plug anything into the black port labeled 'Computer' on the 3G MicroCell.

Remove the sticker that covers the rear panel of your 3G MicroCell.

To ensure success, it is important to complete the steps below in order.

1. Take the

yellow Ethernet cable

'Ethernet'

on the 3G MicroCell.

2. Connect the other end of the

3. Now,

turn off power

in the following order:

a) Gateway or Modem

b) Wi-Fi Router (if you have one)

c) 3G MicroCell

(Do this last

the 3G MicroCell and connect the other end to an

High Speed Internet with Gateway or Modem and Wi-Fi Router

Ethernet Cable

Power

Connect AC power adapter last.

that came with the 3G MicroCell and connect one end to the yellow port labeled

yellow Ethernet cable

to your current internet equipment.

– connect one end of the

(Included)

to any open

Ethernet port on your gateway or Wi-Fi

Wait 1

minute, then

AC Power Adapter

outlet.)

Gateway or Wi-Fi Router

Open Ports

turn on power

to your Internet equipment

to the port labeled

'Power'

Advance to page 12.

router.