Epson Perfection 1670 Photo Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сканер Epson Perfection 1670 Photo. Epson Perfection 1670 Photo 9 страниц. Color image scanner
Также для Epson Perfection 1670 Photo: Информация о продукте (7 страниц), Руководство (11 страниц), Обновление (1 страниц), Бюллетень поддержки продуктов (17 страниц), Бюллетень поддержки продуктов (12 страниц), Важные инструкции по безопасности (4 страниц), Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (46 страниц)

Placing Film on the Scanner

The Perfection 1670 Photo scanner cover has a built-in transparency unit (TPU).

To scan negative film or slides, you'll need to remove the reflective document mat

from the cover and place the film in a holder on the scanner glass.

Make sure the transparency unit cable is connected

to the back of the scanner (see step 4 in

"Connect the Scanner").

Lift the scanner cover all the way up and

slide the reflective document mat up

and off of the scanner cover.

Slide the negative strip into the film holder, with the film's shiny base side

facing down.

Place the film holder in the correct position for your film type. If you are

scanning slides, place the holder on the scanner first, then place the slides

in the holder.

Be sure to match the letter on the film holder tab with the corresponding

letter on the scanner.

B Negatives (the last 3 frames

of the negative strip). Rotate

the film holder and place it

against the right edge of the

scanner.

Note: Make sure the narrow calibration window at the top of the film holder

is clean and uncovered to ensure an accurate scan.

Close the scanner cover.

A Negatives (the first 3 frames

of the negative strip).

C Slides. Place the holder

on the scanner glass, then

put the slides in the holder.