Cisco Firepower 1600 Руководство по установке оборудования - Страница 14

Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Шлюз Cisco Firepower 1600. Cisco Firepower 1600 44 страницы.

Rear Panel

Note

Although the Cisco Integrated Management Controller (CIMC) is not supported on the FMC, you can use

Lights-Out-Management (LOM) on the default management interface (eth0) on a Serial Over LAN (SOL)

connection to remotely monitor or manage the FMC system. For information about using LOM and SOL, see

the

Cisco Firepower Management Center Getting Started Guide for Models 1600, 2600, and 4600

information.

The following figure shows the rear panel of the FMC 1600, 2600, and 4600.

Figure 8: Rear Panel

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide

Temperature status LED:

• Green—The chassis is operating

at normal temperature.

• Amber—One or more

temperature sensors breached the

critical threshold.

• Amber, flashing—One or more

temperature sensors breached the

unrecoverable threshold.

USB 3.0 Type A (USB 1)

You can connect a keyboard, and along

with a monitor on the VGA port, you

can access the console.

eth0 management interface (labeled 1)

Supports 100/1000/10000 Mbps

depending on link partner capability.

VGA video port (DB-15 connector)

USB 3.0 Type A (USB 2)

You can connect a keyboard, and along

with a monitor on the VGA port, you

can access the console.

eth1 management interface (labeled 2)

Gigabit Ethernet 100/1000/10000

Mbps interface, RJ-45, LAN2

CIMC interface (labeled M)

Not supported

Overview

for more