Epson FX-880+ Краткое руководство - Страница 12

Просмотреть онлайн или скачать pdf Краткое руководство для Аксессуары для принтеров Epson FX-880+. Epson FX-880+ 33 страницы. Epson serial impact dot matrix printers
Также для Epson FX-880+: Руководство по настройке (33 страниц), Брошюра и технические характеристики (24 страниц), Руководство (18 страниц), Технические характеристики (2 страниц), Сначала прочитайте это (2 страниц), Справочное руководство (34 страниц)

Печатать страницу
Epson FX-880+ Краткое руководство
6. Remove the front cover by pushing it
straight down, as shown below.
7. Make sure your paper has a clean,
straight edge. Then open both sprocket
covers and fit the first four holes of the
paper, with printable side up, over the
tractor pins.
8. Close the sprocket covers.
9. Slide the right sprocket to remove any
slack in the paper; then lock it in place by
pushing the sprocket lock down.
Downloaded from:
http://www.usersmanualguide.com/
EPSON FX-880+/FX-1180+ Quick Guide
10. Attach the front cover with the
continuous paper positioned as shown
below.
11. Make sure the paper guide is lying flat
on the printer and the edge guides are
open all the way to the left and right.
Then raise the continuous paper
support.
12. Turn on the printer. When the printer
receives data, it automatically loads the
paper and starts printing.
If the first line on your page appears too high
or low, you can change its position by using
the Micro Adjust function as described in
"Micro Adjust Function."
c
Caution:
Never use the knob to adjust the
top-of-form position; this may damage the
printer or cause it to lose the top-of-form
position.
Continuous Paper with the Front Push Tractor (2/2)