Epson FX-880+ Краткое руководство - Страница 15

Просмотреть онлайн или скачать pdf Краткое руководство для Аксессуары для принтеров Epson FX-880+. Epson FX-880+ 33 страницы. Epson serial impact dot matrix printers
Также для Epson FX-880+: Руководство по настройке (33 страниц), Брошюра и технические характеристики (24 страниц), Руководство (18 страниц), Технические характеристики (2 страниц), Сначала прочитайте это (2 страниц), Справочное руководство (34 страниц)

Печатать страницу
Epson FX-880+ Краткое руководство
7. Fit four holes of the paper over the
tractor pins on both sprockets. Then
close the sprocket covers.
8. Slide the right sprocket to remove any
slack in the paper, then lock it in place.
9. Open the edge guides on the paper guide
all the way to the left and right, then raise
the continuous paper support.
10. If you are using the front slot, open the
flap on the front cover. Then, reattach the
front cover as shown below.
11. Turn on the printer.
Downloaded from:
http://www.usersmanualguide.com/
EPSON FX-880+/FX-1180+ Quick Guide
12. Remove any slack in the paper by
pressing the LF/FF button.
c
Caution:
Always remove any slack from the
paper; otherwise print quality may
deteriorate.
13. When the printer receives data, it will
start printing at the current position
without advancing the paper. If
necessary, follow the steps in "Micro
Adjust Function" to adjust the current
position of the paper.
c
Caution:
Never use the knob to adjust the
top-of-form position; this may
damage the printer or cause it to lose
the top-of-form position.
14. Attach the printer cover by inserting the
front tabs into the slots on the printer,
then lowering the cover into place.
15. Send a print job to the printer. The
printer starts printing from the
top-of-form position. After you finish
printing, tear off the printed document
at the perforation nearest the paper exit
slot.
Continuous Paper with the Pull Tractor (3/4)