L Q - 8 7 0 / 1 1 7 0
Paper Handling
Setting the paper-release lever
Single-sheet position
For all single sheets, whether loaded from front,
top, or either of the optional cut-sheet feeders.
Front push-tractor position
For continuous paper when the tractor unit is
installed in the front.
Rear push-tractor position
For continuous paper when the tractor unit is
installed in the rear.
Pull-tractor position
For continuous paper when the tractor unit is
installed on the top. In this case, you can load
paper from either the front, rear, or bottom.
The Cut-Sheet Feeder
Two cut-sheet feeders are available for use with your printer:
Printer
Single-bin
C806371
LQ-870
LQ-1170
C806391
LQ-870/1170-4
High-capacity
C806381
C806401
When the simple cut-sheet feeder is installed alone, you can still
manually insert single sheets using the paper guide.
You can also load up to 25 envelopes automatically with this cut-
sheet feeder.
sheet feeder.
Application Software
Most application programs let you specify the type of printer you use
so that the program can take full advantage of the printer's features.
Many of these programs provide an installation or setup section that
presents a list of printers.
Choosing from a menu
Because Epson printers share a great many commands, you can use
an application program even if it does not list your printer on its
printer selection menu. If your printer is not listed, choose from the
following list (the printers are listed in tire order of preference):
LQ-200
LQ-500
LQ-2550
LQ-1500
If none of these printers is listed, select the first one available from
printer, Draft printer.
Installation/Support Tips
software
each software package. This is usually done through a setup menu. If
this printer is not Listed in your program, see Choosing from a menu,
above, for the next-best model selection.
DIP Switch Settings
The default settings will usually work for most applications, but they
should be checked before using the printer. This will avoid
unexpected results.
Cut-Sheet Feeder/Single-Sheet Operation
page if your software does not properly support cut-sheet paper.
There will be lines from the first page printed at the top of the
page if the page length is not set correctly.
7/l 6/9 1
to 150 sheets of paper.
second
24-Pin Printers
Печатать страницу