Epson Stylus Color 400 Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Аксессуары для принтеров Epson Stylus Color 400. Epson Stylus Color 400 13 страниц. Ms windows 3.x color printer drivers problems
Также для Epson Stylus Color 400: Руководство пользователя (29 страниц), Технический паспорт (2 страниц), Информационный листок о продукте (4 страниц), Руководство (12 страниц), Руководство по быстрой настройке (13 страниц), Руководство по информации о продукте (12 страниц), Бюллетень поддержки продуктов (6 страниц), Бюллетень поддержки продуктов (4 страниц)

1/2/97 10:34am (Right) hw_pig.fm5

7. Lower the ink cartridge into its holder with the label facing

up and the arrow pointing to the back of the printer. The

color cartridge goes on the right and the black cartridge goes

on the left.

8. Press down the ink cartridge clamp until it locks in place.

Caution:

Don't open the clamp or remove a cartridge except to

replace it with a new one. Once you remove a

cartridge, you can't reuse it, even if it contains ink.

9. Press the

cleaning (or

charging. (Even if you don't press a button, ink charging

begins 60 seconds after you close the clamp.)

10.The

power light continues to flash while the ink charges.

When charging is finished, the

and the print heads move to the far right position. Close the

printer cover and resume printing.

Caution:

Never turn off the printer while the

flashing.

load/eject) button to begin

power light stops flashing

power light is

Loading Plain Paper

Always load paper or other media with the printable side

facing up. Look for an arrow on the paper packaging to

indicate the printable side.

1. Lower the output tray and slide out the extension. Then

slide the left edge guide all the way left.

To load long paper, pull out the paper support extension and

both output tray extensions.

To print on transparencies, remove the paper support and

reinstall it in the rear paper support slot.

1/97

EPSON Stylus COLOR 400

EPSON Stylus COLOR 400 - 9