Dill Retrofit TPMS Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Системы управления Dill Retrofit TPMS. Dill Retrofit TPMS 16 страниц.

1.0 Setting Up the System

Have a professional tire retailer install the bands with transmitters in the

wheels. See section 2 for details. Each transmitter has a unique ID and

needs to be installed in the same corresponding position as noted in

Figure on page 11.

1.2.1

Install the supplied antenna to your display unit located at the back of

the unit.

1.2.2 Use the display mount to affix the display unit on the windshield or

dashboard. Do not block the driver's view. If necessary, adjust the

viewing angle of the display.

1.2.3 Plug the power cord into the display unit and plug the adapter into

auxiliary power supply or hardwire to vehicle electrical system.

NOTE:

For hardwired connection, black wire is ground and red is positive.

1.2.4 If your tire cold inflation pressure is 35 psi, you are done. If it is

something besides 35 psi, complete section 1.3.

1.3.1 Set the pressure in all tires to the recommended cold inflation

pressure.

1.3.2 Plug in the display using either provided power cord.

FIGURE 1

1.3.3 Hold down the "R/D" button until

you hear a beep then release.

1.3.4 Press and release the "SET" button.

The display will show "dd" in place

of the pressure readings.

FIGURE 2