Crown DIFFEROID CM-311A Руководство по применению - Страница 10

Просмотреть онлайн или скачать pdf Руководство по применению для Усилитель Crown DIFFEROID CM-311A. Crown DIFFEROID CM-311A 14 страниц. Differoid head-worn condenser microphone
Также для Crown DIFFEROID CM-311A: Информационный лист (2 страниц), Дополнительное руководство (1 страниц), Руководство по применению (6 страниц), Обзорное руководство (1 страниц), Как использовать (4 страниц), Краткое руководство (2 страниц)

Печатать страницу
Crown DIFFEROID CM-311A Руководство по применению
Percussion
Recording/Reinforcement:
• Place a CM-700 about 1 foot away.
• Tape a PZM on the musician's shirt (see the Crown
Boundary Mic Application Guide).
Ambience
Recording:
• Place one or two PZMs on a distant wall, or on the
control-room window.
Grand piano (Figure 10):
Recording:
• Raise the lid. Tape a GLM-100 to the underside of
the lid in the middle. For stereo, use two over the
bass and treble strings. If you need more isolation,
close the lid. Boost a few dB at 10 kHz for clarity.
• Remove the lid. Place two CM-700s or CM-150s 8
inches over the bass and treble strings, 8 inches
horizontally from the hammers. Boost a few dB at
10kHz for clarity.
• Remove the lid. Place two GLM-100s about 12
inches apart, angled 90˚ apart, 18 inches over the
sound board and 10 inches horizontally from the
hammers. Boost a few dB at 10 kHz for clarity.
Reinforcement:
• Use GLMs inside with the lid closed. Boost at 10 kHz
for extra clarity.
Upright Piano (Figure 11):
Recording:
• Remove the panel in front of the player to expose
the strings. Place two mics (CM-200A, CM-700,
CM-150, GLM-100, or GLM-200) over the bass and
treble strings.
• Mike the soundboard a few inches from the bass and
treble strings.
Reinforcement:
• For more isolation and gain-before-feedback, tape a
GLM-100 or two onto the sound board. Experiment
with position for best sound.
Xylophone and Marimba
Recording/Reinforcement:
• Place two CM-700s 18 inches above the instrument
and 2 feet apart.
Banjo (Figure12):
Recording/Reinforcement:
• Clip a GLM-UM Universal Mount to a banjo tension
rod, and position a GLM-100 1 inch from the head,
2 inches from the rim.
10