Dimango HS4335 Руководство
Просмотреть онлайн или скачать pdf Руководство для Система безопасности Dimango HS4335. Dimango HS4335 2 страницы. Vibration alarm
Печатать страницуV
IBRATION
A
Designed to detect
vibration movements
associated with
tampering attempts.
•
Portable – can be used at different
locations or taken along on a trip
•
Can protect windows (even partly
opened), doors, drawers and valuables
•
Uses 9-volt alkaline battery (not included)
INSTALLATION
Snap off the battery cover from the back of the unit. Clip in
1.
a 9-volt alkaline battery with the connections provided and
snap back the battery cover.
Select a suitable vertical surface that is most likely to be
2.
affected by tampering action, ex: at far side of door/window
from hinge.
3.
Remove backing paper covering adhesive on the back of the
two strips provided and attach them to the desired location
with the help of the unit to determine proper separation
between the two.
Hang the Vibration Alarm on the strips and switch unit
4.
from Off to On (if instant alarm is not desired immediately
after the detection of tamper action, then switch unit from
Off to Delay to introduce a delay of approximately 8 sec-
onds after detection). A short "beep" will be heard indicat-
ing the battery is installed properly.
After approximately 15 seconds, the unit will start detecting
5.
vibration. When a tampering attempt is sensed, the alarm
will sound.
The alarm can only be stopped by switching the unit to
6.
Off manually or it will automatically reset itself after
approximately 70 seconds.
Important: The Vibration Alarm will only detect vibration
movement properly when it is placed against a vertical surface
(standing upright).
HS4335
L
AM ON
S
25701 Science Park Drive
Cleveland, Ohio 44122
www.lamson-home.com
Made in China
©2002
0201 SR4335
LARM
#34481-BHFEHg
P R O D U C T S