AEMC instruments 1246 Краткое руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Регистраторы данных AEMC instruments 1246. AEMC instruments 1246 8 страниц. Thermo-hygrometer data logger

Печатать страницу
In addition to setting the instrument's clock, other basic setup tasks include:
Enabling Bluetooth (can be done on the instrument or via DataView)
Setting measurement units to °F or °C (can be done on the instrument or via
DataView)
Changing the Auto OFF interval (requires DataView)
Detailed information for configuring the instrument via the DataView Data Logger Control
Panel is available by pressing the Help button.
Enabling Bluetooth
Long press (>2 seconds) the
Selecting Temperature Units
Press
to toggle between °C and °F.
Making Measurements
1.
Remove the cap protecting the sensor.
2.
If the instrument is OFF, press and hold down the
The instrument displays the time, then the relative humidity (top) and
temperature (bottom) measurements. (The time is set via DataView.)
3.
Press the
displays dew point (top) and relative humidity (bottom). A second press shows
dew point and temperature. A third press restores the original
4.
To change temperature units, press and hold down
(°C or °F) is displayed
INSTRUMENT CONFIGURATION
button to enable/disable Bluetooth.
OPERATION
button to change the displayed measurements. The first press
4
button until it turns ON.
measurements.
until the desired unit