Epson 755c - PowerLite XGA LCD Projector Руководство по эксплуатации - Страница 12

Печатать страницу

Epson 755c - PowerLite XGA LCD Projector Руководство по эксплуатации

Epson PowerLite 755c/765c Projector

4. Select either

Easy connect mode

point mode

You see one of these screens:

5. Make sure the projector has a unique name so you can

identify it when connecting to it from your computer.

Use the

pointer button on the remote control to

highlight the Projector Name text box, then press

The text box turns yellow to indicate you're in input mode.

Press the

pointer button up to select individual letters in

alphabetical order, or down to select letters in reverse order.

Then press the

pointer button to the right to move to

the next character position. When you're done typing the

new name, press

Enter

To enter numbers, press and hold the

remote control while pressing number buttons on the

numeric keypad. Press the

numeric keypad mode. When you're done, press

Epson PowerLite 755c/765c Projector

(for ad hoc) or

Access

Ad hoc

mode

Access

point

mode

Enter

button on the

Num

button again to exit

Num

Enter

6. Select the appropriate settings for your mode, described in

the following table.

ESSID

Password for WEB

control

Projector keyword

DHCP (access point

mode only)

IP address (access

point mode only)

Subnet mask (access

point mode only)

Gateway address

(access point mode

only)

7. When you're done making settings, highlight the

at the top of the screen. Then press

button again and press

Network Screen.

8/05

Ad hoc: Enter an ESSID in the ESSID

textbox.

Access point: Enter an ESSID, which is

the SSID name of your access point or

the name of your AirPort network. (The

name of your AirPort network may be

different from that of your AirPort base

station; select your base station in the

AirPort Admin utility and click

Configure

to check the name of your network.)

Note that the ESSID is case-sensitive.

If you want to create a password for an

internal web page, you can enter up to

8 alphanumeric characters.

Turn this option on if you want to set up

a security keyword so that only people

in the same room as the projector can

access it. When you connect to the

projector wirelessly, it displays a four-

digit randomized keyword on the

screen that you need to enter when

prompted.

If your access point assigns IP

addresses automatically, turn this

option on. Otherwise, turn it off and

assign an IP address, subnet mask, and

gateway address manually.

Enter the IP address you want to assign

the projector. It must be formatted like

other addresses on the network;

usually the first three sections match

the access point's IP address. The last

section should be unique.

Enter a subnet mask formatted like

other subnet masks on your network.

Enter the IP address that was assigned

to your access point or AirPort base

station when it was set up. If you don't

know the address, see "Checking the

Gateway (Access Point's) IP Address"

on page 14.

. Highlight the

Enter

to return to the main EasyMP

Enter

button