Epson 755c - PowerLite XGA LCD Projector Руководство по эксплуатации - Страница 13

Печатать страницу

Epson 755c - PowerLite XGA LCD Projector Руководство по эксплуатации

Configuring the Network Settings for Windows

Before connecting to the projector wirelessly, make sure your

computer is configured correctly. Also, make sure that the

Internet Connection Firewall is disabled. (See your Windows

online help system for details.)

Note:

Depending on your computer's wireless network adapter card,

the dialog boxes you see may be different than those shown in

this section.

1. Access your wireless network Properties window. For

example, in Windows XP click

Network and Internet Connections

the

Network Connections

this:

2. Right-click the

Wireless Network Connection

select

. You see a screen like this:

Properties

Start > Control Panel >

. Then double-click

icon. You see a screen similar to

Right-click and

select Properties

icon and

Click here

Epson PowerLite 755c/765c Projector

3. Click the

Configure

on the screen that appears. You see a screen like this:

4. Ad hoc mode: Highlight

and set the Value to

Access point mode: Highlight

Value to

Infrastructure

5. Ad hoc mode: Highlight

the name you gave the projector's ESSID (for example,

CONF ROOM

Access point mode: Highlight

match the name assigned to the access point.

Note:

The SSID is case-sensitive.

6. Highlight

Encryption

7. Click the

General

wireless network device is enabled.

8. Ad hoc mode: Click

properties dialog box. Then go to "Projecting Wirelessly" on

page 15.

8/05

Epson PowerLite 755c/765c Projector

button. Then click the

Advanced

in the Property list

Network Type

802.11 Ad Hoc

Network Type

and set the Value to match

SSID

and set the Value to

SSID

and make sure it is disabled.

tab and make sure the network card or

to close the network card's

tab

and set the