Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector Краткое руководство - Страница 9

Просмотреть онлайн или скачать pdf Краткое руководство для Программное обеспечение Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector. Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector 20 страниц. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Также для Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector: Руководство пользователя (42 страниц), Руководство по эксплуатации (36 страниц), Брошюра и технические характеристики (2 страниц), Руководство по эксплуатации (47 страниц), Бюллетень поддержки продуктов (27 страниц), Быстрая настройка (2 страниц), Запасные части (1 страниц), Бюллетень поддержки продуктов (25 страниц), Бюллетень поддержки продуктов (22 страниц), Бюллетень поддержки продуктов (28 страниц), Бюллетень поддержки продуктов (41 страниц), Бюллетень поддержки продуктов (15 страниц), Бюллетень поддержки продуктов (22 страниц)

Печатать страницу

Epson PowerLite 9300i - PowerLite 9300NL Multimedia Projector Краткое руководство

Adjusting the Height of Your Image

If the image is too low on the screen, you can raise it using the

Lens Shift. This is the best method for adjusting the height of

the image. If you need to raise the image further, you can tilt

the projector upward by extending the feet.

Using the Lens Shift

To raise or lower the image, use the

remote control (or on the projector).

Note: The Lens Shift buttons won't work when the wide-angle

rear projection lens is installed.

Raising the Projector's Feet

If you need to raise the image further, you can incline the

projector:

1. Stand behind the projector. Press the foot release buttons

on each side and lift the front of the projector.

2. Once the image is positioned where you want it, release the

buttons to lock the feet in position.

3. If necessary, you can level the picture or fine-tune the

height by turning the projector feet.

Raising the projector causes the image to distort or

"keystone," but you can manually correct the shape as

described in the next section.

buttons on the

Lens Shift

EPSON PowerLite 9300i Projector

Adjusting the Image Shape

In most cases, you can maintain a square or rectangular image

by placing the projector directly in front of the center of the

screen and using the Lens Shift (instead of tilting the projector

upward) to adjust the image height.

If this isn't possible, use one of these methods to correct the

image shape:

If the image tapers inward on

the right and left sides only,

use Keystone correction as

described on the next page.

If the image looks uneven on

all sides, or just on the top

and bottom, you can adjust

its shape using QuickCorner.

You cannot use both Keystone correction and QuickCorner at

the same time.

Using Keystone Correction

To adjust your image when the right and left sides are uneven,

do one of the following:

Use the

Keystone

to adjust the image shape.

Keystone buttons

Or use the Keystone function in the

projector's menu system. (Press the

button on the remote control, select the

menu, and press

Setting

Setting menu, select

. Then select

Enter

. Adjust the setting as needed.)

Enter

Note: After using Keystone correction, the image will be slightly

shorter. If it's important to maintain the correct aspect ratio, you

can stretch the image to its proper size using the

the Keystone menu.

10/03

buttons on the projector's control panel

. From the

Enter

and press

Keystone

and press

V-Keystone

Height

EPSON PowerLite 9300i Projector

Menu button

setting in