Toshiba Projector Руководство - Страница 35

Просмотреть онлайн или скачать pdf Руководство для Проектор Toshiba Projector. Toshiba Projector 43 страницы.

Maintenance

Apply a non-abrasive camera lens cleaner to a soft, dry cloth.

• Avoid using an excessive amount of cleaner, and don't apply the

cleaner directly to the lens. Abrasive cleaners, solvents or other harsh

chemicals might scratch the lens.

Lightly wipe the cleaning cloth over the lens in a circular motion. If you

don't intend to use the projector immediately, replace the lens cap.

The lamp hours used timer in the About menu counts the number of hours

the lamp has been in use. After 2,980 hours, the message "Change lamp"

appears on the screen at startup. If the maximum lamp time of 3,000 hours

is exceeded, the lamp will not light. In this case, after replacing the lamp

you must reset the lamp hours by simultaneously pressing both Volume

buttons on the keypad and holding them for 10 seconds.

NOTE: You can order new lamp housings from your dealer. See "NOTE:

Use only approved accessories." on page 39 for information. Use only a

replacement lamp (see "Optional Accessories" on page 39 for the part num-

ber) with the same type and rating as the original lamp.

Turn off the projector and unplug the power cord.

Wait 60 minutes to allow the projector to cool thoroughly.

Turn the projector on its side so that the lamp door is facing you. Using a

flat-blade screwdriver, gently pry the lamp door from the projector by

placing the screwdriver blade into the space between the top of the lamp

door and the projector.

Lamp hours used

wait 60 minutes

lamp door