Toshiba Projector Руководство - Страница 36

Просмотреть онлайн или скачать pdf Руководство для Проектор Toshiba Projector. Toshiba Projector 43 страницы.

Loosen the two captive screws that attach the lamp housing to the pro-

jector.

Detach the lamp connector from the projector by depressing the locking

tab on the connector and lightly pulling it free.

WARNING:

To avoid burns, allow the projector to cool for at least 60 minutes

before you replace the lamp.

Do not drop the lamp housing or touch the glass bulb! The glass

may shatter and cause injury.

Be extremely careful when removing the lamp housing. In the

unlikely event that the bulb ruptures, small glass fragments may be

generated. The lamp housing is designed to contain these frag-

ments, but use caution when removing the lamp housing.

Carefully remove the lamp housing. Dispose of the lamp in an environ-

mentally proper manner.

Install the new lamp housing and tighten the screws.

Re-attach the lamp connector to the projector. The locking tab should

engage when the connector is fully plugged in.

Replace the lamp door.

Plug in the power cord and toggle the Power switch to turn the projector

back on.

To reset the lamp hour timer, navigate to the Settings>Service menu

and select Lamp Reset. See page 34 for details.

screw

connector

locking tab

lamp

housing

Service menu

lamp

connector

lamp cable

lamp

housing

lamp cable

screw