Toshiba TDP-MT700 Руководство пользователя - Страница 22
Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Toshiba TDP-MT700. Toshiba TDP-MT700 34 страницы. Home theater projector
Также для Toshiba TDP-MT700: Руководство пользователя (36 страниц), Руководство по эксплуатации (49 страниц)
Печатать страницу
1. Selecting a picture mode
Select a picture mode on the remote control, or in Picture > Load
Settings menu. There are 4 preset modes available for each input.
These modes are with preset values suitable for various projection
purposes.
Dynamic
Standard
Theater 1
Theater 2
You are also free to custom the picture settings by adjusting the func-
tions provided in Picture menu and save those settings as USER
MEMORY 1, 2, or 3. For more information, refer to
2. Selecting a Screen Size
The aspect ratio is the ratio of image width to image height. HDTV and most DVDs are 16:9, which is
the default for this projector. Most TV shows are 4:3.
Change the image ratio using the SCREEN SIZE buttons on the remote control or in Display >
Screen Size menu. Select an aspect ratio to suit the format of the video signal. There are five aspect
ratios available:
In the pictures below, the black portions are inactive areas and the white portions are active areas.
1.
Full: Scales an image so
that it is displayed in the
center of the screen with
a 16:9 aspect ratio. This
mode is best for squeeze-
signal video images.
2.
4:3: Scales an image so
that it is displayed in the
center of the screen with
a 4:3 aspect ratio. This
mode is best for 4:3 -sig-
nal video images on the 4:3 size screen.
3.
Zoom: Enlarges an
image with letterbox for-
mat to display it in full-
screen format with a 16:9
aspect ratio. The upper
and lower portions of the
image are cropped. Use this setting for Cinema-
scope and Vista video wide screen formats.
3. Other adjustments
You can adjust Brightness, Contrast, Color, and Tint settings using the Picture menu or with the
remote control. Refer to
22
Using the projector and remote control
for more information.
p.26
.
p.27
4.
Theater Wide:
A 4:3 aspect
ratio image is
enlarged NON-
linearly in horizontal direction to
accommodate 16:9 full-screen display.
This stretches only the right and left
sides of the image; the central part is
unchanged. This mode is best for 4:3-
signal video images on the wide
screen.
5.
Through: One-
to-one mapping
is performed on
the input signal
without any scal-
ing with the image displayed at the
center of the screen.
MENU
+
-