Toshiba TDP-MT700 Manual del usuario - Página 22

Navegue en línea o descargue pdf Manual del usuario para Proyector Toshiba TDP-MT700. Toshiba TDP-MT700 34 páginas. Home theater projector
También para Toshiba TDP-MT700: Manual del usuario (36 páginas), Manual de servicio (49 páginas)

Imprimir página

1. Selecting a picture mode

Select a picture mode on the remote control, or in Picture > Load

Settings menu. There are 4 preset modes available for each input.

These modes are with preset values suitable for various projection

purposes.

Dynamic

Standard

Theater 1

Theater 2

You are also free to custom the picture settings by adjusting the func-

tions provided in Picture menu and save those settings as USER

MEMORY 1, 2, or 3. For more information, refer to

2. Selecting a Screen Size

The aspect ratio is the ratio of image width to image height. HDTV and most DVDs are 16:9, which is

the default for this projector. Most TV shows are 4:3.

Change the image ratio using the SCREEN SIZE buttons on the remote control or in Display >

Screen Size menu. Select an aspect ratio to suit the format of the video signal. There are five aspect

ratios available:

In the pictures below, the black portions are inactive areas and the white portions are active areas.

Full: Scales an image so

that it is displayed in the

center of the screen with

a 16:9 aspect ratio. This

mode is best for squeeze-

signal video images.

4:3: Scales an image so

that it is displayed in the

center of the screen with

a 4:3 aspect ratio. This

mode is best for 4:3 -sig-

nal video images on the 4:3 size screen.

Zoom: Enlarges an

image with letterbox for-

mat to display it in full-

screen format with a 16:9

aspect ratio. The upper

and lower portions of the

image are cropped. Use this setting for Cinema-

scope and Vista video wide screen formats.

3. Other adjustments

You can adjust Brightness, Contrast, Color, and Tint settings using the Picture menu or with the

remote control. Refer to

Using the projector and remote control

for more information.

p.26

p.27

Theater Wide:

A 4:3 aspect

ratio image is

enlarged NON-

linearly in horizontal direction to

accommodate 16:9 full-screen display.

This stretches only the right and left

sides of the image; the central part is

unchanged. This mode is best for 4:3-

signal video images on the wide

screen.

Through: One-

to-one mapping

is performed on

the input signal

without any scal-

ing with the image displayed at the

center of the screen.