CRU DataPort DP20 Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Хранение CRU DataPort DP20. CRU DataPort DP20 4 страницы.

DataPort DP20 Quick Start Guide

1 General Information

Keylock/

Carrier

Eject Button

LED

Drive Power

Drive Activity

2.1 Frame Installation

Mount the DP20 frame into the computer chassis. The DP20 frame is interchangeable with

12.7mm slimline optical drives as well as a variety of slimline mounting brackets and bezels.

Please consult your chassis manufacturer's user manual for specific mounting instructions.

Connect the DP20 frame to the motherboard with a SATA data cable. Then connect it to power

with the computer's 6-pin SATA slimline connector (sold separately).

Carrier side caps are packaged within the carrier and are marked "left" and "right" as viewed from

the logo end of the carrier. The "back" mark indicates the end of the rear of the drive should go.

Using two of the supplied screws, mount one side cap to a 2.5" SATA drive. Slide the 2.5" SATA

drive into the DP20 carrier, ensuring that the pins of the unified SATA power and data connector

on the rear of the drive are visible through the slot on the rear of the carrier.

Attach the other black plastic side cap to the HDD, capturing the outer carrier metal and securing

both the side cap and the drive to the carrier.

Do not over-tighten the screws on the side caps, or the carrier may fail to eject properly

from the frame.

Front

Status Lights

Color

State

Green

Solid

Amber

Blinking

The drive inside the DP20 is powered on.

The drive inside the DP20 is being accessed by your

computer.

Rear

SATA Power and

Data Connectors

Description