ARIETE 440 Руководство - Страница 7
Просмотреть онлайн или скачать pdf Руководство для Кухонная техника ARIETE 440. ARIETE 440 12 страниц. Electric grater
Также для ARIETE 440: Руководство (12 страниц)
Печатать страницу
6
Lever
7
Start-up switch
8
Machine body
9
Charging contact
10
Recharge base
11
Charging unit
12
Charging pilot light
SUPPORT
Fig. 1 - 1bis The charging unit is a convenient support for the gratì, both horizontally and vertically.
Fig. 2 Place the base on the desired point, and mark the points to be drilled into the holes with a pencil.
Drill holes on the wall and introduce the dowels and screws.
USE
Fig. 3 Cut the food in small squares (remove the cheese rind), put them in the hopper, lower the lever.
Fig. 4 Press the start button. Fig. 5 gRATÌ is provided with a practical and simple plug to keep the
unused food in the hopper and roll. The plug protects the roll from dirt or dust.
REMOvING/ FITTING THE ROllER
Fig. 6 Turn off the motor, then rotate the indented ring nut anticlockwise by about 1/4 and draw the roll
outwards. Fig. 7 To refit, introduce the roller into its housing, keep it pressed and rotate clockwise by
about 1/4. A click will signal the automatic link.
REMOvING/ FITTING THE HOPPER AN THE ExTERNAl PROTECTION
Fig. 8 To disassemble the hopper, turn off the motor, rotate the indented ring nut anticlockwise by
about 1/4 and remove the roller. Fig. 9 Lift the lever. Fig. 10 Draw the hopper outwards, as shown in
the figure. Fig. 11 Separate the hopper from the external protection by pulling slightly. Fig. 12 To refit
the hopper, align the three grooves with the three hooks on the external protection, press slightly until
you hear a click. Fig. 13 Place back the unit into the machine body housing and press slightly until
you hear a click.
REMOvING/ FITTING THE RUBBER PRESS
Fig. 14 To remove the pusher, pull it firmly out of its seat. Fig. 15 To refit the rubber press, introduce
it into its housing and press with strength, taking care that the tongue matches with the provided slot
on the lever.
ClEANING
Opening the appliance and trying to intervene inside it is strictly forbidden. Keep the appliance
clean, it will thus guarantee excellent quality products and last longer. Do not put the motor body
into water or into other liquids. All the objects shown in the picture (Fig. 16) can be washed by
hand in warm water with mild detergents or in the upper drawer of the dishwasher.
Do not use potentially abrasive products.
5
EN