Pioneer VSX-523-K Руководство по эксплуатации - Страница 31

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стереоприемник Pioneer VSX-523-K. Pioneer VSX-523-K 38 страниц. Av receiver
Также для Pioneer VSX-523-K: Технические характеристики (2 страниц), Краткое руководство по эксплуатации (21 страниц), Краткое руководство по эксплуатации (7 страниц), Руководство по эксплуатации (6 страниц), Руководство по эксплуатации (6 страниц)

Печатать страницу

Pioneer VSX-523-K Руководство по эксплуатации

•

Surr – Select LARGE if your surround speakers reproduce

bass frequencies effectively. Select SMALL to send bass

frequencies to the other speakers or subwoofer. If you

didn't connect surround speakers choose NO (the sound of

the surround channels is sent to the other speakers).

•

Subwoofer – LFE signals and bass frequencies of

channels set to SMALL are output from the subwoofer

when YES is selected (see notes below). Choose the PLUS

setting if you want the subwoofer to output bass sound

continuously or you want deeper bass (the bass

frequencies that would normally come out the front and

center speakers are also routed to the subwoofer). If you did

not connect a subwoofer choose NO (the bass frequencies

are output from other speakers).

When you're finished, press RETURN.

You return to the Manual SP Setup menu.

Note

•

If you select SMALL for the front speakers, the subwoofer

will automatically be fixed to YES. Also, the center,

surround can't be set to LARGE if the front speakers are set

to SMALL. In this case, all bass frequencies are sent to the

subwoofer.

•

If you have a subwoofer and like lots of bass, it may seem

logical to select LARGE for your front speakers and PLUS

for the subwoofer. This may not, however, yield the best

bass results. Depending on the speaker placement of your

room you may actually experience a decrease in the

amount of bass due to low frequency cancellations. In this

case, try changing the position or direction of speakers. If

you can't get good results, listen to the bass response with

it set to PLUS and YES or the front speakers set to LARGE

and SMALL alternatively and let your ears judge which

sounds best. If you're having problems, the easiest option

is to route all the bass sounds to the subwoofer by selecting

SMALL for the front speakers.

X.Over

•

Default setting: 100Hz

This setting decides the cutoff between bass sounds playing

back from the speakers selected as LARGE, or the subwoofer,

and bass sounds playing back from those selected as SMALL.

It also decides where the cutoff will be for bass sounds in the

LFE channel.

•

For more on selecting the speaker sizes, see

on page

30.

Select 'Manual SP Setup' from the Home Menu.

Select 'X.Over' from the Manual SP Setup menu.

2.Manual SP Setup

2b.X.Over

a.Speaker Setting

Frequency

b.X.Over

c.Channel Level

d.Speaker Distance

Return

Choose the frequency cutoff point.

Frequencies below the cutoff point will be sent to the

subwoofer (or LARGE speakers).

When you're finished, press RETURN.

You return to the Manual SP Setup menu.

Channel Level

Using the channel level settings, you can adjust the overall

balance of your speaker system, an important factor when

setting up a home theater system.

CAUTION

•

The test tones used in the Channel Level settings are output

at high volume.

Select 'Manual SP Setup' from the Home Menu.

Select 'Channel Level' from the Manual SP Setup menu.

2.Manual SP Setup

a.Speaker Setting

b.X.Over

c.Channel Level

d.Speaker Distance

Speaker Setting

Select a setup option.

•

Manual – Move the test tone manually from speaker to

speaker and adjust individual channel levels.

•

Auto – Adjust channel levels as the test tone moves

100Hz

from speaker to speaker automatically.

Confirm your selected setup option.

The test tones will start after you press ENTER. After the

volume increases to the reference level, test tones will be

Return

output.

2c.Channel Level

Adjust the level of each channel using /.

If you selected Manual, use

Auto setup will output test tones in the order shown on-

screen:

2c.Channel Level

Home Menu

2c.Channel Level

Test Tone

Manual

ENTER:NextReturn

Return

Test Tone

[ Manual ]

Please Wait . . .20

Caution

Loud test tones

will be output.

 Return

/

to switch speakers. The

Front L

0dB

Center

[

0dB]

Front R

[

0dB]

Surround R

[

0dB]

Surround L

[

0dB]

Subwoofer

[

0dB]

Return