Acom 3x2000A Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кабели и разъемы Acom 3x2000A. Acom 3x2000A 9 страниц. Hf power splitter/combiner for 3 amplifiers

Broadband;
-
Amplifier input ports isolated from each other;
-
Amplifier output ports isolated from each other;
-
Amplifier input ports isolated from output ports;
-
Protection circuit guarantees safe operation of the transceiver and the three amplifiers.
-

1-5. Safety Considerations, Explicit Definitions

This operating manual contains information, precautions, indications for cautions and warnings which must be followed
by the user to ensure safe operation and to keep the ACOM3x2000A in safe operating condition.
PRECAUTIONS:
The EXPLICIT DEFINITIONS described below apply to this operating manual:
W A R N I N G notes call attention to a procedure which, if not correctly performed, could result in
personal injury, fire hazard or electric shock.
C A U T I O N notes call attention to a procedure which, if not correctly performed, could result in
equipment damage, not only in the amplifier.
N O T E notes call attention to a procedure which, if not correctly performed, could result in
inconvenience.
The splitter / combiner works with high RF voltages up to 1000V, which can cause
serious burns! Do not open the device during the operation.
Never allow anyone, ESPECIALLY CHILDREN, to push anything into holes in the case -
this will cause electric shock. NEVER TOUCH AN ANTENNA during transmission - this
may result in an electric shock or burn. NEVER EXPOSE the splitter / combiner to rain,
snow or any liquids. AVOID placing the splitter / combiner in excessively dusty
environments or in direct sunlight. DO NOT OBSTRUCT AIR INTAKE and EXHAUST
(top cover) areas of the splitter / combiner. Keep a minimum distance of 10cm (4
inches) to the intake and 15cm (6 inches) to the exhaust.
Do not undertake on your own repairs or changes in the splitter / combiner in order
not to endanger your or other's health and life and not to damage the device and the
equipment connected with it, not covered by warranty. The manufacturer is not liable
for another's actions and responsibility shall be assumed by the doer.
To avoid damage (not covered under warranty) read the Installation - Section 2 of this operating
manual carefully. If you have any doubts about the installation, operation or safety of the splitter /
combiner, please consult your dealer.
W A R N I N G HIGH VOLTAGE!
W A R N I N G HIGH VOLTAGE!
W A R N I N G
C A U T I O N
3