Whirlpool AWD60A Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сушилка Whirlpool AWD60A. Whirlpool AWD60A 32 страницы. Tumble dryer
Также для Whirlpool AWD60A: Руководство по эксплуатации (16 страниц), Руководство по эксплуатации (22 страниц)

RACK FITTING INSTRUCTIONS

To hold the drying rack out of the way

when not in use, it will be necessary to

attach the retaining clip to the base of

your dryer.

To do this, ﬁrstly remove the screw located

4cm from the right corner of the inverted

dryer (Fig. 3).

Then position the retaining clip over the

hole so that the prong on the clip is near

the cabinet corner and faces outwards

(Fig. 4).

Tighten clip using the same screws. Repeat this on the left side.

Fit drying rack to its cabinet mountings. Tilt rack upwards and align retaining clip until rack

frame "snaps" into prong clip (Fig. 4).

To make use of the drying rack, ﬁrstly rotate

the outlet grill so that the louvers point

towards the rack.

Place items to be dried at the centre of the

Shoes should be placed upside down.

A large woollen article eg. a cardigan, should

be placed over the whole rack, and to ensure

more even drying will need rearranging from

time to time.

Caution:

1. The maximum weight should not exceed 1kg.

2. Make sure the clothes are suitable for the dryer.

3. As the exhaust air temperature rises at the end of a normal drying cycle, it is important that

you regularly check items on the rack to make sure they are not overheated.

TumbleDryer_AWD60A-4.indd 10

Remove

screw

FIG. 3.

Retaining

clip

Drying

rack

FIG. 4.

5/8/08 4:26:01 PM