Whirlpool AZA9791 Руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сушилка Whirlpool AZA9791. Whirlpool AZA9791 18 страниц.

Whirlpool AZA9791 Руководство по эксплуатации

CLEANING THE BOTTOM FILTER

A. Open the bottom filter flap. Lift up the handle of the filter and
pull the bottom filter out.
B. Open the filter by lifting on the latch of the filter frame.
C. Take out the foam from the inside of the filter.
D. Remove the lint on the surface of the foam by hand.
Afterwards, clean the foam under running water to remove
any remaining lint from the foam.
E. Remove the lint from both filter parts by hand. If a white
substance remains on the filter mesh that cannot be removed
by hand, clean the filter parts under running water. If
necessary, use a soft brush.
F. Put the foam back into the filter frame. The foam could also
put inside the filter when it is wet, there is no effect to the
drying result.
G. Install the filter frame into the housing by inserting the tabs of
the frame into the slots on the filter housing and clicking the
latch into place. Please take care that the foam is not pinched
between the filter parts.
H. Clean the filter housing and the mesh inside by hand, with a
damp cloth, or very carefully with a vacuum cleaner.
I. Install the filter again in the dryer, with the handle in
horizontal position. When the filter is fully inserted, move the
handle downwards to lock the filter in place. Ensure that the
handle is fully engaged on both sides behind the hooks of the
housing area.
J. Fix the bottom filter flap again.
IMPORTANT:
Clean the bottom filter after every 5th drying cycle
approximately.
For performance tests according to EN 61121 by test
institutes, the bottom filter must be cleaned after each drying
cycle.
Make sure that the filter meshes and foam are dry before
starting a new drying cycle.
The filter foam must not be washed together with laundry in a
washing machine.
A
B
D
C
E
F
G
H
I
11