FirePro Sigma XT Процедура - Страница 2
Просмотреть онлайн или скачать pdf Процедура для Панель управления FirePro Sigma XT. FirePro Sigma XT 4 страницы. Conventional fire control panel with control unit for aerosol release, system isolation
Также для FirePro Sigma XT: Руководство по установке и эксплуатации (14 страниц)
Печатать страницу1. Introduction
General Information
All FirePro Fire Extinguishing Aerosol Generators use the latest generation FPC solid compound. Upon activation,
the solid compound is transformed into a rapidly expanding, highly efficient gas, based on Potassium salts. It does
not deplete oxygen levels.
maintenance required.
Ozone Depletion Potential (O.D.P.) = 0
Global Warming Potential (G.W.P.) = 0
Self Activation Temperature
FirePro Condensed Aerosols have a built-in fail-safe activation system ensures operation of the generators when
required, even if everything else fails.
When the temperature of the Aerosol units reaches 300°C the unit will activate
DO NOT Carry out any welding or grinding work in the vicinity of the aerosol units.
Handling and Storage - Condensed Aerosol Generators do not:
•
Disassemble the unit
•
Carry out any welding or grinding work in
the vicinity of the fire extinguishing
system components.
STORAGE and OPERATIONAL CONDITIONS
•
Temperature: –54 and +54°C
•
Service life: 15 years (date of manufacture appears on each generator)
Sigma_XT_Isol_1.0.Docx
The FirePro Aerosol Generators have a certified life of 15 years, with minimal
Fire Control Panel – Sigma XT
SYSTEM ISOLATION
Atmospheric Life Time (A.L.T.) = 0
Non-corrosive & Non-toxic
•
Exert force or impact which creates
physical or mechanical damage to the
casing.
•
Humidity: maximum 98% RH
Rev 1.0
Page 2 of 4