Whirlpool 36'' Freestanding Gas Range Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Вентиляционная вытяжка Whirlpool 36'' Freestanding Gas Range. Whirlpool 36'' Freestanding Gas Range 28 страниц. 30" and 36" gas sealed burner cooktop
Также для Whirlpool 36'' Freestanding Gas Range: Руководство по установке (13 страниц), Руководство по установке (10 страниц), Руководство по установке (7 страниц), Руководство по установке (7 страниц), Инструкции по установке и руководство по эксплуатации и уходу (28 страниц), Руководство по установке (6 страниц), Руководство по установке (7 страниц), Инструкции по установке (5 страниц)

Печатать страницу
Whirlpool 36'' Freestanding Gas Range Руководство по установке

Install Range Hood

1. Using 2 or more people, hang range hood on 2 mounting
screws through the mounting slots on back of hood.
B
A
A. Mounting screws
B. Mounting slots
C. Lower mounting screws
2. Remove the grease filter. See "Range Hood Care" section.
3. Level the range hood and tighten upper mounting screws.
4. Install 2 - 5 x 45 mm lower mounting screws and tighten.

Connect Vent System

1. Install transition on top of hood (if removed for shipping) with
2 - 3.5 x 9.5 mm sheet metal screws.
A
B
A. Vent transition
B. 3.5 x 9.5 mm screw
For vented installations only:
1. Fit vent system over the exhaust outlet.
2. Seal connection with clamps.
3. Check that back draft dampers work properly.
8
For non-vented (recirculating) installation only:
1. Assemble the air deflector with the duct cover bracket using
4 - 4.2 x 8 mm screws.
C
2. Measure from the bottom of the air deflector to the bottom of
the hood outlet.
3. Cut the duct to the measured size (X).
4. Remove the air deflector.
5. Slide the duct onto the bottom of the air deflector.
6. Place the assembled air deflector and duct over the exhaust
outlet from the hood.
7. Reassemble the air deflector to the duct cover bracket with
the 4 assembly screws.
8. Seal connections with vent clamps.
C
A. Assembly screws
B. Air deflector
C. Duct cover bracket
B
X
D
E
A. Air deflector
B. Vent clamp
C. X = length to cut vent duct
A
B
A
C
D. Vent duct
E. Exhaust outlet