Alde Compact 3020 HE Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Котел Alde Compact 3020 HE. Alde Compact 3020 HE 19 страниц.
Также для Alde Compact 3020 HE: Инструкции по эксплуатации и монтажу (8 страниц), Поправка к инструкции по установке (4 страниц)
Печатать страницу
7. TOOLS MENU
The tools menu can be accessed from the settings menu.
+22°C
1 kW
7:1
TOOLS MENU – FUNCTIONS
The following tools are available from the tools menu.
A grey function button means the function has not been installed and/or activated in "Installed Accesso-
ries", see section 11.
1
2
3
4
Settings
8
7
6
5
1. Night auto
Automatically changes certain functions
during the night. You can select whether
this is to take place every night or a spe-
cific night each week. The functions that
can be changed are:
•
Temperature
•
*Change to temperature sensor in
sleeping accommodation area.
•
Invert display
•
Turn off the domestic hot water
•
*AC in quiet mode
2. Day auto
Automatically changes certain functions,
e.g. if you are away for a while during the
day. Select that it takes place every day or
a specific day each week. The functions
that can be changed during the day are:
•
Temperature
•
Turn off the domestic hot water
3. Prio setting
With this function you can choose to prio-
ritise (select) electricity or gas as the main
alternative.
Functions marked with a (*) are accessories, which are not installed on all vehicles, refer to the vehicle
8
manufacturer's instructions.
1. The control panel showing the settings menu.
Press the tool symbol to access the tools menu
9
10 11
Settings
13
12
14
15
16
Settings
17
19
18
4. Clock
The clock must be set if engine heater
start, night and/or day auto and
automatic start are to work.
If 12 V power is lost, the clock will
stop and will no longer be displayed.
Installing *battery backup will prevent
this happening
5. Return
To return to the previous menu, press
this symbol.
6. *Setting room sensor
Select which temperature sensor is to
be active. Here you can select whether
the sensor located in the daytime living
area, the sleeping accommodation
or in the panel is to be active. If Auto
is selected, the sensor in the panel is
active and will automatically switch to a
room sensor (sofa and/or bed) if one of
these is connected. If two room sensors
are connected, it will be the one for the
daytime living area that is active (sofa).
20
21
22
Settings
24
23
(part no. 3010 420).