Xerox DocuPrint C3055 DX Руководство по настройке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по настройке для Аксессуары для принтеров Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 33 страницы. Internal hard disk
Также для Xerox DocuPrint C3055 DX: Руководство по установке (8 страниц), Руководство по установке (16 страниц), Руководство по настройке (20 страниц), Руководство по установке (16 страниц)

1.3

Paper Eject Function

This section explains the paper eject function of the printer.

In the ESC/P emulation mode, the printer does not eject a job unless it receives a full page

worth of data. When the host interface is Parallel or USB, and if only a portion of a page is

received, the printer does not eject the page. The printer waits for the data and shows [Data

Wait] on the display until the time set under [Time-out] elapses.

In such situation, you can forcibly print the page without waiting for the time-out period to

elapse.

Use the following steps when forcibly ejecting the data remained in the printer.

Note

• If you send a job to the printer while the display says [Data Wait], the job may not be printed successfully.

Send a job to the printer after forcibly ejecting the current job or after the time-out period has elapsed.

Refer to

• For information about the [Time-out] feature, refer to the 'User Guide'.

Press the <Eject/Set> button when the

display is in the state shown on the right.

The printing starts.

When the printing is finished, the display

reads [Ready to print].

Important

• When [Print Mode] (common menu) is set to [Auto],

you cannot force-eject a job since the display does not

show [Data Wait].

1 Using Emulation

<Eject/Set> button