Xerox DocuPrint C3055 DX Руководство по настройке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по настройке для Аксессуары для принтеров Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 33 страницы. Internal hard disk
Также для Xerox DocuPrint C3055 DX: Руководство по установке (8 страниц), Руководство по установке (16 страниц), Руководство по настройке (20 страниц), Руководство по установке (16 страниц)

1.2

About Fonts

This section explains the fonts that can be used in the ESC/P emulation mode.

The following outline fonts can be used in the ESC/P emulation mode.

Note

• The supported fonts and their print samples can be viewed on the [Font List]. For information about the

[Font List], refer to "2.3 ESC/P Mode Reports/Lists" (P. 22).

Western Fonts

• Roman

• Sans Serif

• OCR-B

Chinese Fonts

Installing the Chinese font kit to the printer allows you to use the following fonts:

• Shu Song

• Hei Ti

• Fang Song

• Kai Ti

The ESC/P emulation mode allows you to use user-defined characters (external

characters).

User-defined characters are stored in the memory (if the optional hard disk is not installed)

and are erased when the printer is switched off.

If the hard disk is installed, user-defined characters are stored in the hard disk and are

retained even when the printer is switched off.

User-defined characters are stored as bitmap fonts and cannot be shared among different

print languages.

Outline fonts of up to a certain size can be cached to improve print speed. When printing

outline fonts, the printer converts them into bitmap fonts. This process can be eliminated by

storing converted bitmap fonts into the memory. This is called "font caching".

The stored bitmap fonts are erased if you switch the printer off or initialize the system.

1.2 About Fonts