Clark Synthesis TST239 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Преобразователь Clark Synthesis TST239. Clark Synthesis TST239 20 страниц. Platinum, gold, silver and all weather transducers
Также для Clark Synthesis TST239: Дополнительное руководство (4 страниц), Руководство по установке (8 страниц), Информационный лист (1 страниц), Руководство покупателя (2 страниц), Руководство по установке (20 страниц), Технические характеристики (1 страниц)

Печатать страницу
Clark Synthesis TST239 Руководство по установке
Installation Type: T-Nut
Requires initial access to the top of the material to
insert the T-nut, which installs flush to the surface.
(Drill a 7/16" hole for the T-nut).
Minimum 3-1/2" vertical space required, including
1/2" clearance between the Transducer and the
T-Nut
3/4"-thick
mounting
surface
Flat Washer
Lock Washer
Transducer Lead Wire
www.clarksynthesis.com
floor.
Drill 7/16" hole
Jam Nut (up)
3/8"-16
Threaded Stud
Jam Nut (down)
Washers
Jam Nuts
Installation: Overview
Installation Type: Hex Bolt
For use with metal, plastic, or other mounting surfaces
no thicker than 1/4". Requires access to the top of
the mounting surface both to install the bolt and to
tighten it.
Minimum 3-1/4" vertical space required, including
1/2" clearance between the Transducer and the
Maximum
1/4"-thick mounting
NEVER TIGHTEN
surface
BY TURNING THE
Transducer. MAKE
SURE TO TIGHTEN
THE JAM NUT
AGAINST THE
Transducer'S BRASS
NUT
floor.
3/8"-16
Hex Bolt
Flat Washer
Lock Washer
Jam Nut (up)
Jam Nut (down)
Transducer Lead Wire
Flat Washer
Lock Washer
Jam Nuts
Tactile Sound Transducers
Drill 7/16" hole
7