Clark Synthesis TST239 Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Преобразователь Clark Synthesis TST239. Clark Synthesis TST239 20 страниц. Platinum, gold, silver and all weather transducers
Также для Clark Synthesis TST239: Дополнительное руководство (4 страниц), Руководство по установке (8 страниц), Информационный лист (1 страниц), Руководство покупателя (2 страниц), Руководство по установке (20 страниц), Технические характеристики (1 страниц)

Installation: Chairs & Couches

As a general rule, most chairs and couches have an underlying wooden frame. The Transducer

can be mounted directly to a frame member or to a hardwood bridge that is rigidly secured

to chair or couch's bottom frame. The bridge should be at least 3/4" thick and cut to span the

two frame members or connect two sides of a box frame. The more centrally located the frame

member or bridge is on the overall structure, the better the distribution of tactile sound.

For best results, the Transducer should be parallel to the ground (horizontal) so that the motion

is up and down as opposed to side to side. The Transducer can be mounted to either the top or

bottom of the bridge. When attaching the Transducer to the top of the bridge, be sure that the

Transducer and the wiring does not interfere with any recliner mechanism. When attaching the

Transducer to the bottom of the bridge, be sure that the Transducer does not touch the floor.

A chair or couch with armrests is preferred since a significant amount of tactile sensation is felt in

the hands and arms.

Hardwood Bridge (min. 3/4" thick)

Transducer mounted

under the bridge

over the bridge

Tactile Sound Transducers