Clark Synthesis TACTILE SOUND AQ339 Aquasonic Руководство по установке - Страница 10

Просмотреть онлайн или скачать pdf Руководство по установке для Усилитель Clark Synthesis TACTILE SOUND AQ339 Aquasonic. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20 страниц. Underwater speaker
Также для Clark Synthesis TACTILE SOUND AQ339 Aquasonic: Дополнительное руководство (4 страниц), Технические характеристики (1 страниц), Список деталей (1 страниц), Руководство пользователя (1 страниц), Справочный лист (1 страниц), Руководство по установке (12 страниц), Руководство по установке (3 страниц), Технические характеристики (1 страниц)

IN-WALL INSTALLATION

Place the wire clamp under each clamp tab, verifying the nut and bolt adjuster is accessible when

the clamp is placed under the tabs. Insure the mounting gasket and face ring are still evenly

centered. Use a wrench and a Phillips screwdriver to tighten the wire clamp. When fully tightened,

the wire clamp should be firmly seated in each clamp tab and the speaker should be secure. Pick

up the assembly and insure it is still properly centered in the face ring. If not, loosen the wire

clamp and adjust.

Take the end of the speaker wire and pull it through the conduit hole in the back of the niche. For

future speaker servicing, leave enough speaker wire in the niche to allow the speaker to be placed

on the pool deck.

Note: In actual applications, the niche will already be mounted in the wall of the pool.

Diluvio

Underwater Speaker

™