ALDI GPMXSZ461 Руководство пользователя - Страница 13

Просмотреть онлайн или скачать pdf Руководство пользователя для Газонокосилка ALDI GPMXSZ461. ALDI GPMXSZ461 18 страниц. 46cm sp petrol lawnmower

Печатать страницу

46CM Petrol Lawnmower

Refill with 470ml SAE30 oil or equivalent ie SAE5W/30,

SAE10W/30). When the dipstick is rested on the filler pipe (i.e. not

screwed in place), the oil level must be between the min and

max marks on the dipstick (Fig 8).

See "Filling with Engine Oil''. Do not overfill.

Start the engine and allow it to run briefly.

Stop the engine, wait one minute and check the oil level. Top up

if necessary.

Note! For more information see the Engine Manual.

Blades

For safety reasons you should only ever have your blade

sharpened, balanced and mounted by an authorised service

workshop. For optimum results it is recommended that the blade

should be inspected once a year.

Note! For engine maintenance, see more details in the Engine

Manual.

Note! Before you remove the hybrid collection box, stop the

engine and wait until the blade stops completely.

Note! You will need garden gloves (not provided) and a spanner

wrench to remove the blade.

Note! Always handle the blade with care- sharp edges could

cause injury USE GLOVES.

Renew your metal blade after 50Hrs mowing or 2yrs whichever

www.coreservice.co.uk

IRE

Maintenance

AFTER SALES SUPPORT

+44 (0)1904 727501

+353 (0)1 902 2605

IRE

Maintenance

is sooner regardless of condition.

Note! If the blade is cracked or damaged replace it with a new

one.

Note! Don't hold the blade by hand directly.

Note! Maintain the sharpness of the blade when cutting grass.

If the blade has worn excessively and become pitted and blunt,

it should be replaced or sharpened. The sharpness of the blade

will affect the performance of the lawnmower.

For safety reasons we recommend that the blade only be

changed by someone qualified and authorised to do so.

1. Tip machine backwards .

2. Hold the blade and unscrew the blade bolt counterclockwise

using a spanner wrench. Remove the washer and the blade.

3. Inspect the blade adaptor on any signs of damage.

4. Fit a new blade, locate the blade on the two studs on the

blade flange and then replace the washer and bolts.

5. Check the washer is still slightly domed to keep the pressure

on the bolt to stop it unwinding, keeping the blade firmly

secure. Then replace the washer (right way around!) and

bolts (Fig 16).

6. Make sure the blade is correctly located, and then firmly

tighten the bolt. Do not over tighten.

AFTER SALES SUPPORT

+44 (0)1904 727501

+353 (0)1 902 2605

IRE

46CM Petrol Lawnmower