Clarke 1700820 Инструкции пользователя - Страница 2

Просмотреть онлайн или скачать pdf Инструкции пользователя для Электроинструмент Clarke 1700820. Clarke 1700820 4 страницы. 1/2" drive torque wrench

INTRODUCTION

Thank you for purchasing this CLARKE Torque Wrench supplied with extension

shaft and adaptor.

This torque wrench is designed to tighten nuts with precision. It should NOT be

used for UNDOING nuts, as severe damage could occur. With correct use, this

tool will produce an accuracy of plus or minus 4%. You can hear and feel

when the desired torque setting has been reached. With careful and

considerate use, the wrench will give years of reliable service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase. This guarantee is invalid if the product is found

to have been abused or tampered with in any way, or not used for its

intended purpose. Faulty goods should be returned to their place of

purchase, no product can be returned to us without prior permission. This

guarantee does not effect your statutory rights.

OPERATING THE TORQUE WRENCH

TORQUE SETTING ADJUSTMENT

The main body is marked in both Newton/Metres (N/m), and Metre Kilograms

(Mkg). The barrel is marked with 13 graduations, one graduation = 1N/m or

0.14 Mkg.

Example: To set the torque to 90N/m

1. Ensure the lock nut is loosened, by turning it anti-clockwise. Turn the knurled

handle until the zero mark on the vertical scale is in line with the 84 mark on

the horizontal scale.

2. Continue to turn the knurled handle until the 6 mark is in line with the centre

line.

3. Tighten the lock nut to secure the setting.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]