Clarke 1700820 Инструкции пользователя - Страница 3

Просмотреть онлайн или скачать pdf Инструкции пользователя для Электроинструмент Clarke 1700820. Clarke 1700820 4 страницы. 1/2" drive torque wrench

METHOD OF USE

NOTE: Preferably, DO NOT use knuckle or universal joints, as these could result

in incorrect torque settings.

1. Place the square drive on to the socket or extension bar, perpendicular to

the nut/bolt to be tightened.

2. Gripping the knurled handle with the right hand, whilst steadying the 1/2"

square drive end with the left, gently but firmly, pull the handle (i.e. in a

clockwise direction) until a click is heard, and a slight 'break' in the handle

is felt. DO NOT turn any further.

• Apply even pressure throughout the operation. DO NOT jerk the

torque wrench when tightening a nut or bolt. This is a precise

measuring instrument and should be treated as such.

• Release the wrench immediately the click is heard/felt.

• Note that the 'click' becomes weaker with the lower torque settings.

CARE & MAINTENANCE

Each torque wrench has been lubricated before leaving the factory. If the

wrench has not been used for some time, operate it several times allowing the

lubricant to re-coat the internal working parts.

• After use, keep adjustment at lowest torque setting.

• DO NOT turn handle below lowest torque setting.

• Clean wrench by wiping. Never immerse in any type of cleaning

fluid.

• The wrench may occasionally require servicing/recalibration in order

to ensure accurate readings, in which case, contact your CLARKE

dealer.

CONVERSION FORMULAE

1kg cm=

1kg/m =

1kg cm=

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

13.887 oz/in

0.08677 lbf /in

7.233 lbf/ft

0.098 N/m

1Nm =

1kgm =

14.161oz/in

8.8507 lbf/in

0.73756 lb/ft

9.80665 N/m