aerauliqa QR590E Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Система отопления aerauliqa QR590E. aerauliqa QR590E 20 страниц. Energy recovery ventilation unit with enthalpic heat exchanger

Печатать страницу
aerauliqa QR590E Руководство по установке
Fig. 7.b CTRL-DSP
E
DATE: shows the current date
F
MODE: shows the operation mode
G
SPEED: shows the selected speed
H
TIME: shows the time
I
FILTER ALARM: shows that filters need to be maintained/replaced
BOOST: shows that BOOST speed is activated
J
K
BOOST KEY: to manually activate the BOOST speed
L
FILTER RESET KEY: to reset the Filter Alarm
ESC key: to exit and go back to the previous menu
M
OK key: to enter the selected menu
N
O
to go DOWN with the menu selection
Some operations can be selected either from the CTRL-DSP buttons or from the menu
When powered on, the CTRL-DSP displays as follows:
Fig. 7.c CTRL-DSP operation screen

7.1 User Menu on CTRL-DSP

To enter the user menu press OK or ESC.
To exit the user menu press ESC or wait for about 60 seconds.
User menu
1 Mode Selection
2 Boost
3 Boost Duration
4 Reset FILTER Alarm
5 Night Mode
6 Installer menu
E
R
S
Q
P
O
Use  or  to select the menu.
Press OK to enter.
F
G
H
T
U
V
W
X
N
L
M
to go UP with the menu selection
P
Q
to power off the ventilation unit
R
shows ERROR ALARM - see point 7.3 to check the type of error
S
this symbol shows if the bypass is active
this symbol shows that ANTI-FROST is active
T
this symbol shows that the IAQ input is activated, i.e.CO2
U
this symbol shows that the HY input is activated.
V
this symbol shows that NIGHT MODE is activated
W
X
this symbol shows that Heating output is activated
I
J
K
9