Clarke CPSB200 Руководство по эксплуатации и техническому обслуживанию - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Электроинструмент Clarke CPSB200. Clarke CPSB200 20 страниц. Pressurised sandblaster

Печатать страницу

ASSEMBLY

FIT THE PRESSURE GAUGE TO THE TANK

Screw the pressure gauge onto

the sandblaster as shown in Fig 1.

• PTFE Tape may be required to

give a perfect seal.

FIT THE HANDLE BARS TO THE TANK

Lay the tank on a flat level surface

(such as a workbench or table

top), with the handlebar mounting

brackets facing up, as shown in Fig

• Handlebars are labelled "LEFT"

and "RIGHT."

2. Align the holes in the left

handlebar with the handlebar

mounting brackets on the left side

of the tank.

3. Place a washer onto each of the four handlebar mounting screws. Insert a

screw through each of the holes in handlebar and mounting brackets,

4. Place a nut onto each of the screws and firmly tighten in place with a

wrench.

5. Repeat steps 2-4 for the right handlebar.

Fig 1

Fig 2