Zanussi FL 908 Буклет с инструкциями - Страница 16

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Стиральная машина Zanussi FL 908. Zanussi FL 908 23 страницы. Front-loading washing machine

Печатать страницу

7. Select the DELAY START

Before you start the programme, if you wish the

starting to be delayed, press the DELAY START

button repeatedly, to select the desired delay. The

relevant light illuminates.

8. Start the programme

To start the selected programme, press the

START/PAUSE button; the corresponding light stops

flashing.

The LAVADO (WASHING) light illuminates.

The machine starts operating.

If you have chosen a delayed start, the machine will

begin the countdown.

9. Altering a programme

You can alter the programme before it starts.

When the programme has started, you can only

reset it by turning the programme selector dial to O

and then you can select the new programme.

The washing water remains in the tub.

Start the new programme by depressing the

START/PAUSE button.

10. Interrupting a programme

Depress the START/PAUSE button to interrupt a

programme which is running, the corresponding light

starts to flash. Depress the button again to restart the

programme.

11. Cancelling a programme

Turn the selector dial to O to cancel a programme

which is running. Now you can select a new

programme.

12. Opening the door after the

programme has started

First set the machine to PAUSE by pressing the

START/PAUSE button.

If the door does not open, this means that the

machine is already heating, that the water level is

above the bottom edge of the door or that the drum

is turning.

If you cannot open the door but you need to open it

you have to switch the machine off by turning the

selector dial to "O". After about 3 minutes the door can

be opened (pay attention to the water level and

temperature!).

13. At the end of the programme

The machine stops automatically.

If the WET ANTI-ARRUGAS (RINSE HOLD) option

has been selected, the phase lights "WET ANTI-

ARRUGAS" and "FIN" (END) are on to indicate that

the water must be emptied out before opening the

door.

To do this first turn the programme selector dial to "O"

and then to drain programme

. The spin programme is performed at the

maximum speed. In order to avoid any creasing or

damage in synthetic, delicate and wool items, the

spin speed must be reduced by means of the relevant

button.

At the end of the programme turn the programme

selector dial to "O" to switch the machine off.

Remove the laundry from the drum and carefully

check that the drum is empty.

If you do not intend to carry out another wash, close

the water tap. Leave the door open to prevent the

formation of mildew and unpleasant smells.

or spin programme