Clarke 7230693 Руководство по эксплуатации и техническому обслуживанию - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Водяной насос Clarke 7230693. Clarke 7230693 13 страниц. 250w puddle pump with auto sensor
Печатать страницу
ASSEMBLY
Remove all packaging and make sure that the unit has no visible damage.
Dispose of all packaging appropriately.
FITTING THE ELBOW
1. Screw the elbow into the outlet
port as shown.
2. Connect a suitable hose (not
supplied) to the pump outlet.
• Suitable hoses are available
from your local Clarke dealer.
FITTING THE HOSE ADAPTER
The 3 step hose adaptor can be
screwed onto the elbow if required.
1. Fit the supplied non return valve
between the adaptor and the
elbow.
2. Trim the adaptor to the required
size.
3. Connect your hose (not supplied)
NOTE: Reducing the hose diameter will effect the maximum flow rate.
SETTING UP THE PUMP
AUTOMATIC OPERATION
This pump has an Automatic Sensor
function. This activates the pump
when the water level sensor is
immersed.
1. The sensor can be 'parked' in one
of three positions (High Medium,
Low) on the pump as shown.
2. The pump will run until the water
level drops below the sensor,.
• The pump continues to run for a further 3 minutes and then stops.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5