Directed Electronics ProStart CT-5472TW Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Дистанционное пусковое устройство Directed Electronics ProStart CT-5472TW. Directed Electronics ProStart CT-5472TW 19 страниц. Two-way 6-button lcd automatic/manual transmission remote starter system with full alarm system
Печатать страницу
Driving Off
With the vehicle running remotely, press the
unlock the doors. Enter the vehicle and do the following:
1.
Turn the ignition key to the IGNITION ON (RUN) position. (Do not turn the key to the CRANK
position while the engine is running. This would cause the starter motor to re-engage.)
2.
Press the brake pedal to disengage the remote starter unit.
You are now ready to drive off.
Arming and disarming of the System
The Alarm can be configured by the installer either to Passive Mode (so as to arm automatically)
or Active Mode (so as to require the user's intervention for arming). By default, the Remote Car
Starter is configured to Passive Mode
Passive mode:
To arm the alarm, press the
1.
In Passive Mode, the alarm will automatically arm 30sec once the last door is closed.
2.
The LED on the antenna will flash quickly during the countdown preceding the activation
of the system.
3.
Once the activation countdown expires, the siren will chirp once and the LED will flash
slowly to indicate that the alarm is now armed.
To disarm the alarm, press the
1.
The LED on the antenna will flash quickly during the countdown preceding the activation
of the system.
2.
The alarm will automatically rearm itself after 30sec if no door is left opened and the
ignition is not turned ON.
Active Mode:
To arm the alarm, press the
1.
The siren will chirp once.
2.
The LED on the antenna will flash slowly.
To disarm the Alarm, press the
1.
The siren will chirp twice.
2.
The LED on the antenna will remain OFF.
Remote Starter Features
Remote Door Locks
If your system was installed with the Remote Door Locks option, you will have the convenience of
remote keyless entry.
To UNLOCK your doors and DISARM the system:
1.
Press and hold the
2.
The
icon will appear on the remote's LCD screen
3.
The siren will chirp twice to confirm that the doors have been unlocked, the Starter Kill
feature is disarmed (if it was installed) and that the Alarm is disabled.
User guide
button to disarm the starter kill (if installed) and
button on the transmitter, OR
button on the transmitter.
button on the transmitter.
button on the transmitter.
button for approx. 1 sec
P.7