Directed Electronics 3808A Руководство по установке - Страница 9
Просмотреть онлайн или скачать pdf Руководство по установке для Система безопасности Directed Electronics 3808A. Directed Electronics 3808A 18 страниц. Auto-mate
Печатать страницу
3 pin Door Lock Harness
GREEN
EMPTY
BLUE
GREEN (-) LOCK OUTPUT
Connect to a wire that pulses ground to activate the vehicle door lock relay. (Usually at the door lock switch
or BCM).
[Optional connection for both configurations]
BLUE (-) UNLOCK OUTPUT
Connect to a wire that pulses ground to activate the vehicle door unlock relay. (Usually at the door unlock
switch or BCM).
[Optional connection for both configurations]
NOTE: For door lock wiring diagrams refer to document #1041 under the Resources tab at www.di-
rectechs.com
5 pin RKE (Remote Keyless Entry) Harness
GRAY/BLACK
RED/BLACK
RED
GREEN/BLACK
DARK GREEN
GRAY/BLACK (+) TRUNK SHUNT INPUT
Connect to a wire that pulses (+)12V when the OEM trunk release is activated. If the system is armed when
the trunk is opened with the OEM remote, the shock sensor and trunk trigger will be bypassed until the trunk
is closed. See diagram below for sensor shunt wiring information.
NOTE: The blue (-) trunk pin input must be connected for feature to work correctly.
ALARM MODULE
[Optional add-on security connection]
© 2012 Directed. All rights reserved.
(-) 200mA LOCK OUTPUT
NOT USED
(-) 200mA UNLOCK OUTPUT
(+) OEM TRUNK SHUNT INPUT
(+/-) DISARM DEFEAT INPUT
(+) DISARM INPUT
(+/-) ARM DEFEAT INPUT
(+) ARM INPUT
BLUE (-)
Trunk Pin Input
GRAY/BLACK (+)
Shunt Input
To Trunk Pin
Trunk Release
Solenoid
To BCM/Control Relay
(+) Trunk Release
Motor Wire
9