- ページ 9

セキュリティシステム Directed Electronics 3808AのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directed Electronics 3808A 18 ページ。 Auto-mate

3 pin Door Lock Harness

GREEN

EMPTY

BLUE

GREEN (-) LOCK OUTPUT

Connect to a wire that pulses ground to activate the vehicle door lock relay. (Usually at the door lock switch

or BCM).

[Optional connection for both configurations]

BLUE (-) UNLOCK OUTPUT

Connect to a wire that pulses ground to activate the vehicle door unlock relay. (Usually at the door unlock

switch or BCM).

[Optional connection for both configurations]

NOTE: For door lock wiring diagrams refer to document #1041 under the Resources tab at www.di-

rectechs.com

GRAY/BLACK

RED/BLACK

RED

GREEN/BLACK

DARK GREEN

GRAY/BLACK (+) TRUNK SHUNT INPUT

Connect to a wire that pulses (+)12V when the OEM trunk release is activated. If the system is armed when

the trunk is opened with the OEM remote, the shock sensor and trunk trigger will be bypassed until the trunk

is closed. See diagram below for sensor shunt wiring information.

NOTE: The blue (-) trunk pin input must be connected for feature to work correctly.

ALARM MODULE

[Optional add-on security connection]

(-) 200mA LOCK OUTPUT

NOT USED

(-) 200mA UNLOCK OUTPUT

(+) OEM TRUNK SHUNT INPUT

(+/-) DISARM DEFEAT INPUT

(+) DISARM INPUT

(+/-) ARM DEFEAT INPUT

(+) ARM INPUT

BLUE (-)

Trunk Pin Input

GRAY/BLACK (+)

Shunt Input

To Trunk Pin

Trunk Release

Solenoid

To BCM/Control Relay

(+) Trunk Release

Motor Wire