Clarke CAT32B Руководство по эксплуатации и техническому обслуживанию - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Пила Clarke CAT32B. Clarke CAT32B 16 страниц. High speed sabre saw
Также для Clarke CAT32B: Инструкции по эксплуатации и техническому обслуживанию (16 страниц)

OPERATION

1. Slide the safety lock forward.

2. Squeeze the trigger

• Allow the saw to reach full speed

before use.

3. Releaase the trigger to stop the

saw. When the blade has

stopped remove it from the

workpiece.

4. Release the trigger to stop the

tool.

5. Always ensure the tool has stopped before putting it down.

DISCONNECTING THE AIR SUPPLY

1. Do not disconnect the air supply hose until the compressor has been shut

down and the compressed air pressure released.

2. Once the pressure has been released, disconnect the air supply hose from

the tool.

STORAGE

1. Store the tool safely in its box in a dry, secure environment.

2. When storing, ensure the blanking plug is replaced on the airline

connector once the airline has been disconnected.

3. If the tool is not to be used for longer than 24 hours, run a few drops of

CLARKE airline oil into the air inlet and run the tool for a few seconds to

ensure that the oil has been well distributed throughout the tool.

Parts & Service: 020 8988 7400/E-mail: [email protected] or [email protected]

SAFETY LOCK

TRIGGER