Clarke Metalworker CBS45MD Руководство по эксплуатации и техническому обслуживанию - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Пила Clarke Metalworker CBS45MD. Clarke Metalworker CBS45MD 19 страниц. 6” (152mm) bandsaw
Печатать страницу
Electrical Connections
Connect the mains lead to a standard 230V (50Hz) electrical supply through an
approved 13Amp BS1363 plug, or a suitably fused isolator switch.
WARNING!
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow
As the colours of the flexible cord of this appliance may not correspond with the
coloured markings identifying terminals in your plug proceed as follows:
•
Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter
E or Earth symbol "
•
Connect BROWN coloured cord to plug terminal marked with a letter L or
coloured RED
•
Connect BLUE coloured cord to plug terminal marked with a letter N or coloured
BLACK
IMPORTANT: If this appliance is fitted with a plug which is moulded on to the
electric cable (i.e. non- re-wireable) please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a
danger of electric shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most
electrical stockists.
Fuse Rating
The fuse in the plug must be replaced with one of the same rating (13 amps)
and this replacement must be ASTA approved to BS1362.
IMPORTANT: If in any doubt, do not attempt any electrical repair yourself. Consult
a qualified technician
This Appliance must be Earthed!
- Earth
Blue
- Neutral
Brown
- Live
"or coloured GREEN or GREEN & YELLOW.
6