Clarke 7610960 Руководство по эксплуатации и техническому обслуживанию - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Инструменты Clarke 7610960. Clarke 7610960 8 страниц. Tube roller
Печатать страницуOPERATION
1. Turn the Rotary Handle on top
counter-clockwise, which will raise
the Upper Roller.
2. After raising the bottom edge of the
Upper Roller above the top edges of
the Bottom Rollers, place the work
piece into the tools cutouts of the
rollers until it is contacting all three
rollers, then using the Rotary Handle
to tighten the Travelling Bolt down by
a 1/4 of a turn to put light pressure on
the tubing.
3. Facing the Driving Handle, begin
forming by feeding your tubing into
the left hand side of the tool while
turning the Driving Handle clockwise
and tightening down gently with the
Rotary Handle.
4. When creating tighter radii, you may need to spiral your work piece slightly
to clear the body of the tool. This can easily be flattened out after
completion.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6