Directus Prodigy One NN-SC-1001 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильная видеосистема Directus Prodigy One NN-SC-1001. Directus Prodigy One NN-SC-1001 15 страниц. Nissan/infiniti

Печатать страницу

Locate and pull back 4 mounting tabs for front faceplate. These will be identified by

small pull tabs with de-tents in them to keep the faceplate clipped on.

Note: A small pick tool can be used to free the tabs.

Once faceplate has been removed, place LCD assembly aside and locate two pieces

Fig

shown in

One is LCD plastic mount (black) and the other is the touch panel glass. Place black

plastic frame into original LCD frame (metal) as shown below in

Fig.

with the ribbon cable groove positioned at the bottom of original LCD frame

(metal).

Next, place touch panel glass into plastic frame with ribbon cable facing up as shown in

Fig.

( Note: foam gasket will be face up.)

Re-assemble faceplate with touch panel glass as shown in

Once assembled, remove 4 board mounting screws as shown in

(You will no longer need them)

Fig.